Adjusting The Legs; Replacing The Interior Lamp - Beko DS 133020 Bedienungsanleitung

Adjusting the legs

If your refrigerator is unbalanced;
You can balance your refrigerator
by turning its front legs as illustrated
in the figure. The corner where the
leg exists is lowered when you turn
in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone to
slightly lift the refrigerator will facilitate
this process.

Replacing the interior lamp

Should the light fail to work, proceed
as follows.
1. Switch off at the socket outlet
and pull out the mains plug.You may
find it useful to remove shelves for
easy access.
2. Use a flat tipped screwdriver to
remove the light diffuser cover.
3. First check that the lamp hasn't
worked loose by ensuring it is screwed
securely in the holder. Replace the
plug and switch on.
4. If the lamp works, replace the
light cover by inserting the rear lug
and pushing up to locate the front two
lugs.
Downloaded from www.Manualslib.com manuals search engine
5. If the light still fails to work,
switch off at the socket outlet and pull
out the mains plug. Replace the lamp
with a new 15 watt (max) screw cap
(SES) lamp.
6. Carefully dispose of the burnt-
out lamp immediately.
7. Replacement light lamp can
easily be obtained from a good local
electrical or DIY store.
13
EN