Maintenance And Service; Maintenance And Cleaning; Environmental Protection - Bosch PST 650 L Bedienungsanleitung

OBJ_BUCH-2 609 000 687-001.book Page 7 Tuesday, February 1, 2005 3:50 PM

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep the
machine and ventilation slots clean.
Clean the saw blade holder regularly. For this, remove
the saw blade from the machine and lightly tap out the
machine on a level surface.
Heavy contamination of the machine can lead to mal-
functions. Therefore, do not saw materials that produce
a lot of dust from below or overhead.
In extreme working conditions, conductive dust
can accumulate in the interior of the machine
when working with metal. The protective insula-
tion of the machine can be degraded. The use of
a stationary extraction system is recommended
in such cases as well as frequently blowing out
the ventilation slots and installing a residual cur-
rent device (RCD).
Lubricate the guide roller 9 occasionally with a drop of
oil.
Check the guide roller 9 regularly. If worn, it must be
replaced through an authorised Bosch after-sales serv-
ice agent.
WARNING! Important instructions for connecting
a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the fol-
lowing code:
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it must be
disposed of safely.
If the machine should fail despite the care taken in man-
ufacturing and testing procedures, repair should be
carried out by an after-sales service centre for Bosch
power tools.
In all correspondence and spare parts order, please
always include the 10-digit article number given on the
type plate of the machine.
2 609 000 687 • 1.2.05
Downloaded from www.Manualslib.com manuals search engine
Service and Customer Assistance
Exploded views and information on spare parts can be
found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
✆ Service:. . . . . . . . . . . . . . . +44 (0) 18 95 / 83 87 82
✆ Advice line:. . . . . . . . . . . . +44 (0) 18 95 / 83 87 91
Fax: . . . . . . . . . . . . . . . . . . . . +44 (0) 18 95 / 83 87 89
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
✆ Service:. . . . . . . . . . . . . . . . .+353 (0)1 / 4 14 94 00
Fax: . . . . . . . . . . . . . . . . . . . . . .+353 (0)1 / 4 59 80 30
Australia and New Zealand
Robert Bosch Australia Pty. Ltd.
RBAU/SPT
1555 Centre Road
P.O. Box 66
3168 Clayton/Victoria
✆ . . . . . . . . . . . . . . . . . . . . . +61 (0)1 / 3 00 30 70 44
Fax: . . . . . . . . . . . . . . . . . . . . +61 (0)1 / 3 00 30 70 45
www.bosch.com.au

Environmental Protection

Recycle raw materials instead of
disposing as waste
The machine, accessories and packag-
ing should be sorted for environmental-
friendly recycling.
These instructions are printed on recy-
cled paper manufactured without chlorine.
The plastic components are labelled for categorized
recycling.
Subject to change without notice.
English–7