Safescan 6155 Bedienungsanleitung Seite 6

5.3.1. COUnTInG COInS
When counting coins, always use the factory supplied coin cup. This cup is calibrated for your specific machine and
cannot be used on other machines without prior recalibration (see chapter 8.0 recalibration).
• Remove the cup from the machine. The machine will automatically switch to the next denomination.
Automatic add mode:
Remove the cup from the machine. The machine will make two short 'beeps' to confirm that the counting result is
correctly stored. The machine will automatically switch to the next denomination.
• Use the
• Continue counting until all your coins are counted.
Overload
when counting coins, please make sure not too exceed the maximum weight of 1 kg on the scale. when the
maximum weight is exceeded, the machine will make a warning beep and the
screen. In this case, reduce the coins in the cup and weigh again. Store the results with the
the keys to return to the same denomination to count and store the remaining coins.
5.3.2. COUnTInG BanknOTES
Manual add mode:
• Press key to store the counting result. The machine will make two short 'beeps' to confirm that the counting
result is correctly stored. The
• The machine will automatically switch to the next denomination.
automatic add mode:
Remove the banknotes from the machine. The machine will make two short 'beeps' to confirm that the counting
result is correctly stored. The machine will automatically switch to the next denomination.
• Use the
• Continue counting until all your banknotes are counted.
5.3.3. COUnTInG MOnEY PaCkaGES
It is possible to count coin and banknote packages with the Safescan 6155. To activate this function you need
Safescan PC software. See: www.safescan.com for more information.
6
Downloaded from www.Manualslib.com
• The machine starts with the smallest coin denomination (€ 0.01).
Put the € 0.01 coins in the cup and place the coin cup on the money hook.
• Wait until you hear a 'beep'.
Manual add mode:
• Press
'beeps' to confirm that the counting result is correctly stored.
The
keys at any time to return to a denomination to add another counting or to skip a denomination.
For counting banknotes, the machine will use a unique procedure to ensure
maximum accuracy of your counting results. This procedure ensures always
accurate counting results even when there are small weight differences between
banknotes due to dirty or damaged notes. Before placing banknotes on the scale
make sure that the money hook is empty and never use the coin cup to count
banknotes.
• Use the
• Place banknotes on the money hook in little stacks (max. 15 to 20 notes). After a
short confirmation beep, the machine is ready to receive the next stack of
the same denomination that is currently being used. Wait for another beep to
place the next stack on top. Repeat this procedure until all notes of the selected
denomination are counted.
symbol will appear on the screen.
keys at any time to return to a denomination, add another counting or skip a denomination.
manuals search engine
key to store the counting result. The machine will make two short
symbol will appear on the screen.
keys to select the banknote denomination (i.e. € 5)
symbol will appear on the
key and use