Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
05
Disc playback
Basic operations
Function
Main unit
Play
Stop
Pause
Track up/
down
Fast
forward/
reverse
16
En
Remote
Operation
control
Press in the stop mode.
Press in the playback mode.
(when playing a CD)
"RESUME" is displayed
and the place where you
stopped play is
memorized. Press again
and the memorized
position is cleared.
Press in the playback mode.
Press 1; to resume
playback from the paused
point.
Press in the playback or
stop mode.
If you press the button in the
stop mode, press 1; to
start the desired track.
(when playing MP3)
You can only skip forward
or back to music files
inside the same folder.
Press and hold down in the
playback mode.
Release the button to
resume playback.
Advanced CD or MP3 disc playback
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press
repeatedly until "REPEAT ONE" appears. Press
ENTER.
To repeat all tracks:
Press
repeatedly until "REPEAT ALL" appears. Press
ENTER.
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play (CD)" section
(page 17) and then press
ALL" appears. Press ENTER.
To cancel repeat play:
Press
repeatedly until "REPEAT OFF" appears. Press
ENTER.
Note
• After performing repeat play, be sure to press ∫.
Otherwise, the disc will play continuously.
• During repeat play, random play is not possible.
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press RANDOM repeatedly until "RANDOM ON" appears.
Press ENTER.
To cancel random play:
Press RANDOM repeatedly until "RANDOM OFF" appears.
Press ENTER.
Note
• If you press the 9 during random play, you can move
to the track selected next by the random operation.
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
• During random play, repeat play is not possible.
repeatedly until "REPEAT
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
