Pioneer XW-NAw1-k Bedienungsanleitung Seite 14

Using The XW-NAW1-K
Connecting to an
auxiliary audio
source
1. Make sure the XW-NAW1-K
and the auxiliary audio source
are both turned off.
2. Connect an audio cable (not
included) to the output of the
audio source.
This end of the cable should
match the output of the source
(for example, 3.5 mm stereo
mini-jack, 1/4" stereo jack, or
RCA stereo jacks).
3. Connect the other end of the
audio cable to the auxiliary
input jack on the bottom of the
XW-NAW1-K. This end of the
cable must be a 3.5 mm stereo
minijack.
4. Turn on the audio source and
the XW-NAW1-K. Press and
hold the
key on the XW-NAW1-K
remote control or front panel
to turn your iPod off. (it will
continue to charge while it's
connected). Start playing the
auxiliary audio source.
14
En
(Play / Pause)
P
R
COMPONENT
To switch back to your docked
iPod:
Turn off the auxiliary source
press the
key on the XW-NAW1-K remote
control or front panale to turn on
your iPod.
P Y
B
VIDEO OUT AUX IN DC IN 16V
(Play / Pause)