Maintenance And Cleaning - Bosch GST 150 CE Professional Originalbetriebsanleitung

OBJ_BUCH-1027-002.book Page 13 Monday, December 12, 2011 11:45 AM
Action
Adjusting the Cutting Angle
Mounting the sliding shoe
Mounting the splinter guard
Orbital Action Settings
Adjusting the stroke rate
preselection
Switching On and Off
Guide the power tool toward the
workpiece only when switched on
Lubrication when cutting metal
Plunge Cutting
Mounting and use of the parallel
guide
Selecting accessories

Maintenance and Cleaning

For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Bosch Power Tools
Figure Please observe
5
6
7
8
9
10
11
12
13
14
–
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Regularly spray penetrating oil onto the saw blade holder (see
figure 16, page 181).
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 17, page 181).
English | 13
Page
173–174
175
175
176
176
177
178
178
178–179
179–180
182–184
2 609 932 837 | (12.12.11)