General Information - Comet CRRC 51 ECO Anleitungen Für Montage, Gebrauch Und Wartung

Batteriebetriebener sprizwagen

Vorschau ausblenden Andere Handbücher für CRRC 51 ECO:

Betriebsanleitung (154 Seiten)

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

INSTRUCTIONS TRANSLATED FROM ITALIAN

This instruction manual (hereinafter referred to as "manual", meaning "instruction manual") consists of

two separate parts.

The first part is addressed to both the end user and the

for wheelbarrow operation and maintenance. The second part is for the exclusive use of the

and provides instructions for the correct assembly of the machine.

TECHNICIAN

SPECIALIST TECHNICIAN

authorised to carry out non-routine maintenance and repairs on the machine. It should be recalled

that work on electrical parts must be carried out by a

, i.e. a person professionally qualified and trained in the checking, installation and repair

ELECTRICIAN

of electrical equipment, in accordance with good workmanship practice and in accordance with the

regulations in force in the country where the machine is installed.

CAUTION

• Machines are supplied in assembly kits: a wheelbarrow equipped with a 50, 80 or 120 litres tank

and a CBM (Comet Battery Module) containing an EVERFLO motor pump (battery operated).

The CBM module must be of the type provided by the Manufacturer. Different types of modules may

not be used unless authorised by the Manufacturer.

• Assembly of the spraying wheelbarrow and installation of the CBM module must be carried out by a

SPECIALIST TECHNICIAN

• The Manufacturer's "Declaration of Conformity" is only guaranteed if the above points are strictly

observed.

We recommend carefully reading this manual, the manual for the EVERFLO motor pump and the manual

for the CBM module included on the machine: pay special care to the information contained therein.

Particular care must be paid to reading the parts of the text marked with the symbol:

as they contain important safety instructions for using the motor pump.

The Manufacturer shall not be liable for damage arising from:

• failure to comply with the contents of this manual, in that of the EVERFLO motor pump and in that of

the manual of the CBM module that is included on the machine;

• use of the machine other than that set out in the

• use contrary to the regulations in force regarding safety and accident prevention in the workplace;

• tampering with safety devices or maximum operating pressure limitations;

• erroneous assembly or installation;

• lack of due care regarding routine maintenance intervals;

• modifications or interventions not authorised by the Manufacturer;

• use of non-original spare parts or accessories or those unsuitable for the machine model;

• repairs not carried out by a

PREAMBLE

refers to a person, generally from the support centre, specially trained and

, observing the instructions given in the second part of this manual.

PART ONE