Assembly and Connection
4.1 Unpacking the Device
4.1
Unpacking the Device
The device was packaged at the factory to meet the requirements of IEC 60255-21.
Unpack the device with care and do not use force. Use an appropriate tool for this. After unpacking, visually
check the device for any mechanical defects.
NOTE
i
i
If the device has been damaged during transport, do not connect and commission it.
Comply with any additional notes enclosed with the packaging.
²
Keep the transport packaging for any future shipping.
²
24
SIPROTEC 4/5, Injection unit 7XT71, Manual
C53000-B1174-C128-8, Edition 05.2020