System Functions; System Connection - Denon DCD-201SA Bedienungsanleitung

ENGLISH
(8) Setting the pause mode at the beginning
of a certain track (remote control unit) ......................................................... [Pause]
q Finding the beginning of a track directly
2 Use this function to set the pause mode at the
beginning of a track with the direct search operation,
for example when you want to record that track onto a
cassette tape or mini-disc.
CALL PROG DIRECT
1 2 3
4 5 6 7
2
8 9 10 +10
TIME
POWER
REPEAT
1
RANDOM
REMOTE CONTROL UNIT RC-268
1
Press the pause button.
Select the track to be played.
2
or
4
8
(Remote control unit) (Remote control unit)
To start playback, press the play
button.
To perform this operation during
programmed playback, first press
the direct button to cancel the
programmed play mode.
14
Downloaded from www.Manualslib.com
w Finding the beginning of a track using the
programmed play mode
CALL
4
8
POWER
2
REMOTE CONTROL UNIT
2
Set the programmed play mode.
1
Refer to page 12.
Press the pause button.
The beginning of the first
2
programmed track is found
and the pause mode is set.
(Remote
control unit)
To start playback, press the play
button.
1 2 3
5 6 7
9 10 +10
(Remote
control unit)
DIRECT
(Remote
control unit)
manuals search engine
11

SYSTEM FUNCTIONS

(1) System connection

Operation is even easier when the components in the 201SA series are connected to the DCD-201SA with system
2
connections. (For instructions on connections, refer to the respective operating instructions of pre-main amplifier
(PMA-201SA) or receiver (DRA-201SA).
The system functions will only work when the components of the 201SA series are connected. They will not work
PROG DIRECT 2
with other components.
1 2 3
The system function signals for operating the components in the 201SA series are all output from the pre-main
2
5 6 7
amplifier (PMA-201SA). Thus, when making system connections, be sure to connect the pre-main amplifier (PMA-
9 10 +10
201SA) or stereo receiver (DRA-201SA).
TIME
(2) Auto power on function (when connected to the 201SA series components)
REPEAT
When the system is set to the standby mode, you can start the playback of disc simply by pressing the play/pause
2
button.
RANDOM
RC-906 (system remote control unit)
RC-268
2
(Remote
control unit)
(Remote
control unit)
Set the function select
switch on the remote
OFF ON
control to "CD" position.
SYSTEM
POWER
1
PROG /
DIRECT
1 2 3
CALL
4 5 6
CLEAR
7 8 9
RANDOM REPEAT
Press the play/pause button.
10 +10
CD SRS
CD-R TAPE MD TIME EDIT • System's power turn on and
the function of pre-main
REV. TIME/
Dolby NR DIMMER
MODE PANEL
2
amplifier
RDS BAND TUNING
switches to "CD".
And then, the CD starts
playing.
STOP PLAY VOLUME
/SELECT
PRESET
When a CD is loaded with the DCD-201SA in the
+
standby mode, CD playback can be started simply
-
by pressing the DCD-201SA's play button.
TAPE
SLEEP FUNCTION MODE
CD
TUNER
MD
CD-R
TAPE
1
RC-906
REMOTE CONTROL UNIT
CD
TUNER
MD
CD-R
TAPE
(RC-906)
PLAY
automatically
(RC-906)