DeFelsko PosiTector DPM Kurzanleitung Seite 8

When
measurement data via USB, Bluetooth or WiFi to PosiSoft.net.
(PosiSoft Desktop Manager and an internet connection are
required when using USB or Bluetooth.)
Allows the Gage to automatically synchronize with PosiSoft.net
when initially connected to the internet via a PC running PosiSoft
Desktop Manager or a local WiFi network.
Additional measurements added to memory while connected are
synchronized only when the USB cable is disconnected, then
reconnected or when the Sync Now option is selected.
The Gage uses a USB mass storage device class which provides
a simple interface to retrieve data in a manner similar to USB flash
drives, cameras or digital audio players.
NOTE:
cable. The batteries are not used and the body will not
automatically power down. If rechargeable (NiMH) batteries are
installed, the Gage will trickle charge the batteries.
Allows individual readings to be sent to a computer, printer or
compatible device as they are taken using Bluetooth wireless
technology. See www.defelsko.com/bluetooth
Allows wireless communication with devices such as tablets,
smart phones and computers connected to your local wireless
network or portable mobile hot spot. See www.defelsko.com/WiFi
Determines if a software update is available for your Gage.
See www.defelsko.com/update
WARNING:
update (see pg. 3)
Downloaded from www.Manualslib.com
Sync Now
selected, Gage
Auto SYNC
USB Drive
When connected, power is supplied through the USB
Bluetooth
(Advanced models only)
WiFi
(Advanced models only)
Updates
The Gage may perform a Hard Reset after an
manuals search engine
Connect Menu
Connect Menu
immediately
7
synchronizes stored