Technical Data - EINHELL BM-LE 500E Bedienungsanleitung

Anleitung BM-LE 500 E 12.05.2003
GB
Operating Instructions for the Electric
Hammer Drill
Use only sharp bits and use your machine carefully.
STARTING UP
Momentary operation (Fig. 2)
Switch on: Press ON/OFF switch 6
Switch off: Release ON/OFF switch 6
Continuous operation (Fig. 2)
Switch on: Press ON/OFF switch 6 and lock in
place with the locking button 5
Switch off: Press and release ON/OFF switch 6
Drill/Hammer drill selector switch (Fig. 3)
You can change from drilling to hammer-drilling
using the selector switch 4. To drill, push the selector
switch 4 to the „drill" symbol on the left. To hammer-
2
The speed is
varied by applying
more or less pres-
sure on switch 6.
You can preselect
the speed by tur-
ning the knurled
screw in switch 6.
6
13:39 Uhr Seite 6
drill, push switch 4 to the „hammer" symbol on the
right. The hammer drill function is for drilling in maso-
nry, concrete and stone.

TECHNICAL DATA:

Voltage:
Power rating:
Chucking range:
Drilling capacity Concrete: 13 mm
Speed:
Sound pressure level LPA:
Power level LWA:
Vibration - a w
Weight
Totally insulated
3
Hammer drill
´
Drill
230 V 50 Hz
500 W
max. 13 mm
Steel: 10 mm
Wood: 20 mm
0-3000 rpm
89,2 db (A)
102,2 db (A)
22,5 m/s 2
1,9 kg
II /