Maintenance And Care; Metal Grease Filter; Removing The Front Panels; Removing The Metal Grease Filter - AEG DD 8796 Benutzerinformation

Maintenance and care

Warning! Before performing any maintenance operation, isolate the
hood from the electrical supply by switching off at the connector and
removing the connector fuse.
Or if the appliance has been connected through a plug and socket, then
the plug must be removed from the socket.

Metal grease filter

• The purpose of the grease filters is to absorb grease particles which
form during cooking and it must always be used, either in the
external extraction or internal recycling function.
Attention: the metal grease filters must be removed and washed,
either by hand or in the dishwasher, every four weeks.
• To access the grease filter,
first remove the front panels
which conceal the grease
filter.
Removing the front
panels:
Extract the small panel,
rotate upwards and unhook.
Repeat the operation for all
the small panels. Fig. 4.
Removing the metal
grease filter
Pull the handle downards,
then extract the filter.Fig. 5.
Extract
Unhook
Bild 3
Fig. 4
Handle
Fig. 5
57