Maintenance And Care; Removing The Metal Grease Filter - AEG DF 6164 Benutzerinformation

Maintenance and Care

• The hood must always be disconnected from the electricity
supply before beginning any maintenance work.
Metal grease filter
• The purpose of the grease filters is to absorb grease particles which
form during cooking and it must always be used, either in the
external extraction or internal re-circulation function.
Attention: the metal grease filters must be removed and washed,
either by hand or in the dishwasher, every four weeks.

Removing the metal grease filter

• Press the handle locking the grease filter first towards the
opposite side then down. Fig. 3
Hand washing
Soak grease filters for about
one hour in hot water with a
grease-loosening cleaner,
then rinse off thoroughly with
hot water. Repeat the process
if necessary. Refit the grease
filters when they are dry.
Dishwasher
Place grease filters in the
dishwasher. Select most
powerful washing programme
and highest temperature, at
least 65°C. Repeat the
process. Refit the grease
filters when they are dry.
When washing the metal
grease filter in the dishwasher a slight discolouration of the filter can
occur, this does not have any impact on its performance.
• Clean the inner housing using a hand hot solution only(never use
caustic detergents, abrasive powders or brushes).
Fig. 3
23