Verifying Proper Installation (Windows Xp) - Belkin F5U508 Handbuch

Installation

Verifying Proper Installation (Windows XP)

After installation, check the Device Manager to confirm that the PCI Card has
been properly installed.
1. Right-click on "My Computer".
2. Select "Properties".
3. Select the "Hardware" tab and click on the "Device Manager" button.
4. Click the plus sign (+) next to "Universal Serial Bus Controller".
EN
The "Universal Serial Bus Controller" list will now include one entry for "ALi
PCI to USB Enhanced Host Controller" and one entry for "USB 2.0 Root Hub".
5. Click the plus sign (+) next to "Universal Serial Bus Controllers".
The "Universal Serial Bus Controllers" list will now include two "Ali PCI to USB
Open Host Controller" entries and two "USB Root Hub" entries.
Note: If your computer features built-in USB ports, or if you have other USB
PCI controllers installed, you will see additional root hub entries.
6. Click the plus sign (+) next to "IEEE 1394 Bus Controller".
The "OHCI Compliant IEEE 1394 Host Controller" list will now include one
"OHCI Compliant IEEE 1394 Host Controller" entry.
7. Click the plus sign (+) next to "Network Adapters".
The "Network Adapters" list will now include one "1394 Net Adapter".
Note: If your computer features built-in IEEE 1394 ports, or if you have other
IEEE 1394 PCI host controller cards installed, you will see additional "IEEE
1394 Host Controller" and "1394 Net Adapter" entries.
21
5248ea-A_F5U508ea.indb 21 14/2/07 9:08:52 am