Samsung POWERbot SR1 Serie Kurzanleitung Seite 6

CAUTION
Before use
• Insert the dustbin before using
POWERbot.
• Be careful with the followings for proper
automatic recharging.
– Always turn on the power of the
docking station.
– Install the docking station where
POWERbot can easily find.
– Do not leave any object in front of the
docking station.
• When installing the docking station, do
not leave the cord carelessly on the floor
since POWERbot may get tangled by it.
• Do not use POWERbot on black colored
floors.
– The POWERbot may not be able to
operate normally.
• Do not place any objects within 0.5 m
to both sides and 1 m to the front of the
docking station.
• Make sure the docking station's charging
contact is not damaged or have any
foreign matters on it.
• Do not install the docking station in an
area with a dark floor.
– If the floor around the docking station
is dark, recharging is hindered.
• Move any obstacles that may disturb
POWERbot's movement (such as children's
indoor swing or slides) before cleaning.
• Do not use the POWERbot in a place
which is narrower than the turning
radius (0.5 m or less) of the POWERbot.
• If a brush or brush cover is not
assembled correctly, scratches may occur
on the floor, or product malfunction may
occur.
• Before operating the POWERbot, remove
the objects which could break such as
a frame, mirror, and porcelain items
so that the POWERbot works without
interruption.
VR7000_Q_guide_13ge_00780C-02.indb 6
2
-4
Safety information
In use
• Using POWERbot on thick carpet may
damage both POWERbot and the carpet.
– The POWERbot cannot pass over carpet
that is thicker than 1 cm.
• Do not use POWERbot on tables or other
high surfaces.
– There is a risk of damage if it falls.
• The POWERbot may bump into chair,
desk legs therefore move them away for
faster and efficient cleaning.
• When POWERbot is operating, do not lift
it up or carry it to another area.
• Do not hold by driving wheels of
POWERbot when carrying it to another
area.
• Do not put any objects on top of
POWERbot and camera since it may
cause malfunction.
• Remove any large papers or plastic bags
immediately when using POWERbot
since they may block the intake.
• Do not aim the red pointer directly at
people or animals.
• Do not lie down around the POWERBOT
that is running.
– Your hair may be caught in the brush,
resulting in physical injury.
Cleaning and maintenance
• Prevent any damage to POWERbot by
complying with the following
– Do not clean POWERbot by spraying
water directly onto it or use benzene,
thinner, acetone or alcohol to clean it.
• Do not disassemble or repair POWERbot.
This should only be done by a certified
repairman.
• Always keep the obstacle sensor, cliff
sensor and camera clean.
– If foreign matter accumulates, sensors
may malfunction.
English-6
2017-12-04 오전 10:17:56