EINHELL HR 160 Bedienungsanleitung Seite 9

Anleitung HR 160 SPK1:_
Layout (Fig. 1)
1 ON/OFF switch
2 Connection, high-pressure hose to device
3 Connection, water inlet
4 High-pressure hose
5 Pistol
6 Connection, high-pressure hose to pistol
7 Lance
8 Nozzle
9 Foam nozzle
10 Handle
11 Lance with rotating nozzle
General safety regulations and
accident prevention
It is essential that you read the safety regulations
and operating instructions in their entirety and follow
the information contained therein in order to elimina-
te the possibility of an accident or potentially dange-
rous situation from occurring while working with the
high-pressure cleaner.
¼
The electrical connection must be installed by an
electrician in accordance with IEC 60364.
¼
The power plug must be plugged into a properly
installed and earthed socket outlet with connec-
ted earth-leakage circuit breaker (30 mA).
¼
Always check the device, the mains cable and
the plug before using the high-pressure cleaner.
Only operate the device when it is in good wor-
king order and has not been damaged in any
way. Damaged parts must be immediately repla-
ced by a qualified electrician.
¼
Always pull the power plug out of the socket out-
let before doing any work on the high-pressure
cleaner, before changing the nozzle and whene-
ver the cleaner is not being used.
¼
Only use suitable extension cables when working
outdoors. Extension cables must have a mini-
mum cross-section of 1.5 mm 2 . The plug connec-
tions must have earthing contacts and be rainwa-
ter-protected. Cables over 10 m in length must
have a cross section of at least 2.5 mm
¼
Warning! This device was developed to be used
with cleaning agents supplied or recommended
by the manufacturer. The use of any other clea-
ning agents or chemicals can negatively affect
the safety of the device.
¼
Warning! Do not use the device when other
persons or animals are in the near vicinity unless
09.01.2007 8:19 Uhr Seite 9
they are wearing appropriate protective clothing.
¼
Warning! High-pressure jets can be dangerous
when the cleaner is not used properly. Do not
direct the jet toward persons, animals, live
electrical equipment or the device itself.
¼
Do not direct the jet toward yourself or others in
order to clean clothes and footwear.
¼
Do not allow the high-pressure cleaner to be
used by children or unauthorized persons.
¼
Warning! High-pressure hoses, fittings and cou-
plings are important components that help to
ensure device safety. Only use high-pressure
hoses, fittings and couplings that are recommen-
ded by the manufacturer.
¼
In order to ensure the operational safety of the
device, only use genuine manufacturerʼs replace-
ment parts or parts that have been approved by
the manufacturer.
¼
Do not operate the device if the mains cable or
other important parts of the device - e.g. safety-
related elements, high-pressure hoses, spray
pistol - are damaged.
¼
Warning! Unsuitable extension cables can be
dangerous.
¼
Do not pull or carry the electric tool by its mains
cable. Protect the mains cable from becoming
damaged by oil, solvents and sharp edges. Do
not pull or carry the electric tool by its mains
cable.
¼
Keep your place of work tidy.
¼
Ensure that the switch is turned off when
connecting the unit to the power supply.
¼
Wear suitable work clothes.
¼
Check your high-pressure cleaner to ensure that
it is in good working order. If the cleaner is not
functioning properly, have it checked by an aut-
horized professional. Have all maintenance and
inspection work carried out only by a qualified
electrician or ISC GmbH.
¼
The water jet that emerges from the high-pressu-
re nozzle produces a „kickback" on the spray
pistol. Therefore, make sure that you have a
solid footing and that you have a firm hold of the
pistol grip. In order to protect yourself from possi-
2 .
ble flying objects (that are released due to the
high pressure), wear suitable protection gear.
¼
Use cleaning agents sparingly. Observe the
dosing instructions of the manufacturer.
¼
The high-pressure jet can damage vehicle tires
and tire parts. Keep a distance of at least 30 cm
from the object being cleaned.
GB
9