Electrical Connection - Bega Ehc-360E Bedienungsanleitung

2.6 Electrical connection

DANGER!
The appliance must be connected to the mains by a
qualified professional, who is familiar with and
adheres to the local requirements and supplementary
regulations of your electricity supplier.
DANGER!
Do not carry out the installation yourself. RISK OF
ELECTRIC SHOCK!
Instructions for the installer (qualified
professional)
Remember that the connection wire should match the
connection type and the power rating of the cooker. The
connection wire must be secured in a strain-relief clamp. The
ground wire must be connected to the marked clamp of the
terminal. The electric supply of the appliance must be equipped
with an emergency switch with a distance between the
contacts of at least 3 mm which disconnects the entire
appliance from the mains in a case of emergency. Read the
information on the rating label and the connection diagram
before connecting the appliance to the mains.
When the socket is not accessible for the user or a fixed
electrical connection of the appliance is required, an all-pole
disconnecting device must be incorporated during installation.
Disconnecting devices are switches with a contact opening
distance of at least 3 mm. These include LS-switches, fuses and
protectors (EN 30335).
 H
OW TO OPEN THE CONNECTION BOX
slightly downwards (2) to open the box; s. fig. below. You
may need to release two locks on both sides of the
connection box.
50
: move a screwdriver (1)