Installation Of The Oven - Bega Ehc-360E Bedienungsanleitung

NOTICE!
The hob must be in the installation opening of the
worktop properly and firmly. Check the seal for
perfect fit and overall cover.

2.5 Installation of the oven

DANGER!
The appliance must be connected to the mains by a
qualified professional, who is familiar with and
adheres to the local requirements and supplementary
regulations of your electricity supplier.
DANGER!
All electrical work must be carried out by a qualified
professional. Do not modify the energy supply. The
connection must be carried out in accordance with the
current local and legal regulations.
Depending on model, you must connect the cable
bundle of the hob to the control panel of the oven
before finally fixing the oven.
(1) Turn off the energy supply (fuse box).
(2) Provide an opening meeting the dimensions on the drawing
below (s. fig. 2, below).
(3) Insert the oven into the opening and install it properly. In
doing so, it is essential to observe the instructions referring
to the electrical connections given in the chapters 2.6
-Electrical connection / connection diagram, and chapter
2.7 -Electrical connection / oven/hob connection-.
(4) The appliance must be grounded.
(5) Complete the installation of the appliance and fix the oven
with 4 screws (s. fig. 1, below).
48
NOTICE!