Operating Instruction; Data Hold; Ac Voltage Measurement - SATA 03021 Bedienungsanleitung

will be turned off automatically about 15 s after turned on.
10. Function/position switch
- This switch is used for selecting desired function and position, and switching on or off
meter power.
11. " " Button
- For diode or continuity test function, this button is used for switch between diode and
continuity test functions.
- For temperature test function, this button is used for switch between Celsius and
Fahrenheit test functions.
- For other test functions, this button is used for data hold.

Operating instruction

a) Data hold
In other functions than diode, continuity and temperature, press the "
lock the screen, after which an "
this button again to unlock the screen, after which the "
b) DC voltage measurement
1. Insert the black and red probes into the "
2. Set the function switch to "
3. Connect the probes to the two ends of the power or circuit to be measured.
4. Take readings. and the polarity of the end connected to red test probe will also be
indicated.
Note:
To avoid electric shock or damage to the meter, do not apply a voltage greater than
600V to the input.
03021
" symbol will appear on the current screen. Press
".
" jacks.
-22-
EN DE RU KO
" button to
" symbol will disappear.
PT JA ES