Panasonic CF-VDR Serie Bedienungsanleitung Seite 15

CAUTION
Do not install the software using a drive other than this drive. Be sure to insert this
drive into your computer, and then insert the disc for installation.
Close all other software application before running the Setup program for
B's Recorder and B's CLiP for added safety.
Log on to Windows with the administrator authority.
Do not lose the serial number marked on the sticker on the packaging of the CD case.
NOTE
Depending on the computer, preparatory steps may be necessary before installation.
Before installing the application, be sure to read the Operating Instructions or Refer-
ence Manual of the computer.
Installing B's Recorder / B's CLiP
1 Set "DVD Drive Utility Disc" in the drive.
Windows XP
[Utility Setup tool] screen will appear (allow some time for disc recognition).
When the setup program will not run automatically, input [x:\setuputil.exe]*
[Run] and select [OK].
Windows 2000
At the message, select [OK]. (Check again that the steps in "Before Installing B's Re-
corder / B's CLiP" (
appear (allow some time for disc recognition).
When the setup program will not run automatically, input [x:\setuputil.exe]*
[Run] and select [OK]. At the message, select [OK].
2 Select [B's Recorder Gold/B's CLiP Setup].
3 Select [B's Recorder GOLD BASIC] and follow the on-screen instructions.
During the course of the installation process, you will be asked to input a serial number. Input
the serial number marked on the sticker on the packaging of the CD case or on the disc itself.
4 Upon completion of the installation, select [Yes, I want to restart my computer now],
then select [Finish]. The computer will restart automatically.
5
Windows XP
Input [x:\setuputil.exe]*
[Utility Setup tool] screen will appear.
Windows 2000
Input [x:\setuputil.exe]*
[Utility Setup tool] screen will appear.
4
* "x" is the drive letter. You can change the letter to suit your preference.
page 14) have been performed.) [Utility Setup tool] screen will
4
in [start] - [Run] and select [OK].
4
in [Start] - [Run] and select [OK]. At the message, select [OK].
E
4
in [start] -
4
in [Start] -
15