Dell W1900 Benutzerhandbuch Seite 17

Using the VGA Connector
NOTE:
Only one connector can be used for a computer, either VGA or DVI.
1
Turn off the TV display and unplug the power cord.
2
Connect the blue VGA cable to your TV display and to your computer.
3
Connect the green audio cable to the connector on the TV display and to your computer.
4
Plug in the power cords for the TV display and devices and turn them on.
5
Enter the OSD and select the VGA. For additional information about the Input Select menu,
see page 24.
Using the SCART Connector
1
Turn off the TV and unplug the power cord.
2
Connect your device.
3
Plug in the power cords for the TV and devices and turn them on.
4
Enter the OSD and select the AV5 (SCART). For additional information about the Input
Select menu, see page 24.
Downloaded from www.Manualslib.com manuals search engine
Setting Up Your TV Display
17