Dell W1900 Benutzerhandbuch Seite 15

Using the S-Video Connector
1
Turn off the TV display and unplug the power cord.
2
Connect your device including the audio cables.
3
Plug in the power cords for the TV display and devices and turn them on.
4
Enter the OSD and select the AV2 (S-Video). For additional information about the Input
Select menu, see page 24.
Using the Component Connectors
1
Turn off the TV display and unplug the power cord.
2
Connect your device including the audio cables.
3
Plug in the power cords for the TV display and devices and turn them on.
4
Enter the OSD and select the AV3 (
information about the Input Select menu, see page 24.
Downloaded from www.Manualslib.com
Component
manuals search engine
Component
1) or AV4 ( 2). For additional
Setting Up Your TV Display
15