Using The On-Screen Display; Using Your Remote Control With The Osd - Dell W1900 Benutzerhandbuch

Using the On-Screen Display

Your TV display has an on-screen display (OSD) that allows you to select the proper input source,
make adjustments to the image and audio settings, select to view Picture-In-Picture, Picture-
Outside-Picture, and Picture-By-Picture.

Using Your Remote Control With the OSD

NOTE:
the side panel of the TV display or you can use the remote control. Except where noted, this section
describes how to use the OSD with the remote control.
1
To enter the OSD, press the Menu button.
Seven icons appear along the bottom of the screen.
2
Use the left and right buttons (volume buttons) to move between the icons.
The icon appears highlighted as you move through the menu.
3
To select an option, push the Menu button when the icon is highlighted.
4
A new menu appears for that selected option. Use the up and down buttons
(channel buttons) to move through the various settings.
NOTE:
appears next to the option that you have selected.
5
Use the left and right buttons (volume buttons) and the Enter button to adjust or
select settings.
NOTE:
6
After you have made your selections, push the Menu button to return to the main menu.
7
To exit the OSD, select the Exit icon and press Enter.
Downloaded from www.Manualslib.com
You can access and make selections to the OSD using the volume and channel buttons on
A red arrow appears next to the setting as you navigate through the options. A check mark
You can select Exit or press the Menu button at any time to return to the main menu.
FILE LOCATION: C:\Gama\Dell_Compal\OM Update\Target\ML\W1701_1900e41.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 5 / 0 4 – F O R P R O O F O N LY
manuals search engine
Using the On-Screen Display
23