Vitamix TurboBlend Two Speed Bedienungsanleitung Seite 39

O P E R AT I N G I N ST R U C T I O N S
Dry Blade Container
If purchased, your dry blade container should only be used for hard, dry materials such as grain, and for
kneading dough.
1. Make sure that the High/Low Switch is set to Low ( ) .
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending (unless the tamper is
inserted through the lid plug opening). Especially when blending hot ingredients, make sure the lid is
securely latched .
3. With the motor off, set the dry blade container on the motor base by aligning it over the centering pad.
Never put a container on an operating motor base or to operate a motor base without a container properly
in place.
4. Start with the High/Low Switch in the Low ( ) position. Always start your machine on Low ( ). Activate
the machine by turning the On/Off Switch to On (|). Your container may shift and get into an aligned
position.
5. After turning the machine off, wait until the blades completely stop before removing the lid or container
from the motor base.
6. Due to the machine's speed, and the sometimes short processing times, count your time carefully to
avoid over processing .
7. Processing dry material for more than 2 minutes could damage your machine. Regular use may result in
cosmetic marring of the container and cause the blades to become dull over time .
8. Preparing some herbs may release oils, causing the container to discolor permanently. Others have strong
odors that may linger in the container, affecting the flavor of other foods. The preparation of some herbs
and spices may also cause the blade to dull over time, or the container to crack.
39