Technical Data - Migatronic AUTOMIG2 i Betriebsanleitung

Technical data

POWER SOURCE
Mains voltage ±15% (50-60Hz), V
Minimum generator size, kVA
1 Minimum short-circuit power Ssc, MVA
Fuse, A
Mains current, effective, A
Mains current, max., A
Power, (100%), kVA
Power, max., kVA
Power, open circuit, W
Efficiency
Power faktor
Current range, A
Duty cycle 100%
Duty cycle 40%
Duty cycle max.
Duty cycle 100%
Duty cycle 60%
Duty cycle 35%
Duty cycle max.
Open circuit voltage, V
Sphere of application
2
3 Protection class
Standards
Dimensions (HxWxL), mm
Dimensions DUO (HxWxL), mm
Weight, kg
Weight DUO, kg
Data for Boost-version are stated at 1x230V mains supply
Data in parenthesis are stated at 3x400V mains supply
** = Power save function. The machine will enter the power save
function 7.5 minutes after finalising the welding operation
1) This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to the
stated data in the abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution
network operator if necessary, that the equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in
the abovementioned table.
2) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks
3) Equipment marked IP23/IP23S is designed for indoor and outdoor applications.
14
Downloaded from www.Manualslib.com
AUTOMIG
2
183i/183i DUO
3x400
7.5
0.47
10
4.4
7.5
3.1
5.2
15/10**
0.86
0.93
15-180
20°C, A 160
20°C, A 180
20°C, A/%/V
40°C, A/V 115/19.8
40°C, A/V 125/20.3
40°C, A/V
40°C, A/%/V 180/25/23.0
45
S/CE/CCC
IP23S
660x380x790
960x600x850
26.2
41.2
manuals search engine
AUTOMIG AUTOMIG
2 2
233i/233i DUO 273i/273i DUO
3x400 3x400
11.4 13.5
0.69
10 10
6.8 7.6
11 13.2
4.7 5.3
7.6 9.1
15/10** 20
0.86 0.88
0.93 0.93
15-230 15-270
220 230
245
230/50/25.5
165/22.3 175/22.8
175/22.8 205/24.3
200/24.0
230/25/25.5 270/30/27.5
45 52
S/CE/CCC S/CE/CCC
IP23S IP23
EN/IEC 60974-1. EN/IEC60974-5. EN/IEC60974-10
660x380x790 550x250x640
960x600x850 960x570x870
26.5 26
41.5 55
EC DECLARATION OF CONFORMITY
hereby declare that our machine as stated below
Type: AUTOMIG
conforms to directives:
European standards:
Issued in Fjerritslev 17.05.2017
AUTOMIG Boost
2
273i/273i DUO
3x230-400. 1x230-400
14.5 (14.5)
16
10.5
42.0
2.4(3.0)
9.7(9.5)
30
0.84
0.99
15-270
150 (180)
180 (200)
107 (135)/19.4(20.8)
130 (170)/27.5(22.5)
270/18(25)/27.5
55
S/CE
IP23
550x250x640/960x570x870 (DUO)
28 / 57 (DUO)
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
2 i
2014/35/EU
2014/30/EU
2011/65/EU
EN/IEC60974-1
EN/IEC60974-5
EN/IEC60974-10 (Class A)
Niels Jørn Jakobsen
CEO