Notes:
–
Pressing and holding the
Increase
changes the value approximately
every half-second.
–
If one of the information screens in
Table 2.4 appears, you tried to
increase or decrease the value
beyond the limits programmed by your
clinician.
Table 2.4
Lower limit
Upper limit
or Decrease
Parameter limit screens
You tried to decrease amplitude
below the lowest value allowed.
Press any arrow on the Navigator
key to clear the screen.
You tried to increase amplitude
above the highest value allowed.
Press any arrow on the Navigator
key to clear the screen.
2016-06-01
key,
3037 English
47