Medtronic InterStim iCon Bedienungsanleitung Seite 44

2. Press the left
Navigator key to move the selection box
to the desired program
Note: A blank box
program is not active. It will become
active when you press the Sync key
(refer to Step 3 on page 44)
.
Figure 2.8
3. Hold the programmer over your
neurostimulator with the screen facing
outward and press the Sync
send the change to your neurostimulator
(Figure 2.9).
4. Verify that the new program is active
on the Therapy screen (Figure 2.9).
44
English 3037
or right
indicates that a
Change to a different program.
2016-06-01
arrows on the
(Figure 2.8).
key to