1. Hold the patient programmer over your
neurostimulator with the screen facing
outward and press the Neurostimulator
on
2. Hold the patient programmer over your
neurostimulator with the screen facing
outward and press the Increase
Decrease
(Figure 2.10). The increase or decrease
occurs without pressing the Sync key
and is saved in the neurostimulator.
However, you may not feel the change
immediately.
Figure 2.10
46
English 3037
, Neurostimulator off
key. The Therapy screen appears.
key as needed
Decrease
Decrease and Increase keys.
2016-06-01
Increase
, or Sync
or