How The Patient Programmer Works - Medtronic InterStim iCon Bedienungsanleitung

How the patient programmer
works
The patient programmer communicates with
your neurostimulator by sending signals to
and receiving signals from the
neurostimulator. To send and receive the
signals, either the internal antenna of the
patient programmer, or the detachable
external antenna (Model 37092), must be
placed over the neurostimulator
(Figure 2.2).
28
English 3037
Decrease
Neurostimulator on
Neurostimulator off
Sync
Navigator
Figure 2.1 The patient programmer.
2016-06-01
Increase
Power/
backlight