Inhaltsverzeichnis
Werbung
4. Attach the camera on the target location with
the screw driver using the provided tab screw.
Wall or ceiling
Main body
Screw Driver
5. Set the proper image by moving the camera
body (PCB board) inside the dome camera
upward or downward and set the focus by
turning the lens to the left or right direction.
Wall or ceiling
Adjust the
image upward
turning left or right
or downward
6. Assemble the dome cover by turning it
clockwise.
NOTE
Please make sure that any foreign matter gathers
on the lens cover when assembling or
disassembling the dome cover.
8
User Guide
Tab screw
Adjust focus by
5. Specifications
Item
Broadcasting
SCC-520/521 :NTSC
system
STANDARD
SCC-520P/521P/523P:PAL
STANDARD
Pick-up device
1/3" SUPER HAD IT CCD
Number of effective
SCC-520 : 510(H) x 492(V)
pixel
SCC-521 : 768(H) x 494(V)
SCC-520P : 500(H) x 582(V)
SCC-521P/523P : 752(H) x 582(V)
Synchronization
Internal
Resolution
SCC-520/520P : 330 TV Lines (H)
SCC-521/521P/523P :
Video output
VBS 1.0Vp-p(75 , composite)
S/N ratio
More than 50dB
Min. illumination
SCC-520(P) : 1Lux(F2.0, 50 IRE)
SCC-521(P)/523P :
Lens (focal length)
SCC-520(P)/521(P) : f=3.8mm
SCC-523p
Gamma correction
0.45
In/out connector
Signal output: BNC, Power input :
DC jack
Operating
-10~+50°C
temperature
Power source
DC 12V
Power consumption
2 W
Size
100(ø) x 67(H)mm
Weight
150g
9
User Guide
Details
350 TV Lines (V)
480 TV Lines (H)
350 TV Lines (V)
2Lux(F2.0, 50 IRE)
: f=2.9mm
E
Werbung
Inhaltsverzeichnis
