Travel Lock - Philips RQ1090 Bedienungsanleitung

English
12

travel lock

You can lock the shaver when you are going to
travel. The travel lock prevents the shaver from being
switched on by accident.
activating the travel lock
1 Press the on/off button for  seconds to enter
the travel lock mode.
The lock symbol appears on the display (all
,
types) and you hear a beep (RQ1090 only) to
indicate that the travel lock has been activated.
Note: The displays of types RQ1060 and RQ1050 look
different but show the same indication.
Deactivating the travel lock
1 Press the on/off button for  seconds.
The motor starts running to indicate that the
,
travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in
charger, the travel lock is automatically deactivated.
Blocked shaving heads
- If the shaving heads are blocked, the shaving unit
symbol and the tap symbol with exclamation mark
flash. In this case, the motor cannot run because
the shaving heads are soiled or damaged.
Note: The displays of types RQ1060 and RQ1050 look
different show the same indication.
- When this happens, you have to clean the shaving
unit or replace it.
- The shaving unit symbol and the tap symbol
with exclamation mark continue to flash until you
unblock the shaving heads.