Use As Directed; Prohibited Use - Kollmorgen AKM 2G Serie Betriebsanleitung

1.2.2 Use as directed

The AKM2G series of synchronous servomotors is designed especially for drives for industrial
l
robots, machine tools, textile and packing machinery and similar with high requirements for
dynamics.
The user is only permitted to operate the motors under the ambient conditions which are defined
l
in this documentation.
The AKM2G series of motors is exclusively intended to be driven by servo amplifiers under
l
speed and / or torque control.
The motors are installed as components in electrical apparatus or machines and can only be
l
commissioned and put into operation as integral components of such apparatus or machines.
The thermal sensor which is integrated in the motor windings must be observed and evaluated.
l
The holding brakes are designed as standstill brakes and are not suited for repeated operational
l
braking.
The conformity of the servo system to the standards mentioned in the CE Declaration of
l
Conformity Approvals
etc.) that are used have been supplied by Kollmorgen.

1.2.3 Prohibited use

The use of the Standard Motors is prohibited
l
directly on mains supply networks,
l
in areas where there is a risk of explosions,
l
in contact with food and beverage,
l
in environments with caustic and/or electrically conducting acids, bases, oils, vapors, dusts.
l
Commissioning the motor is prohibited if the machine in which it was installed
l
does not meet the requirements of the EC Machinery Directive,
l
does not comply with the EMC Directive,
l
does not comply with the Low Voltage Directive.
l
Built-in holding brakes without further equipment must not be used to ensure functional safety.
l
is only guaranteed when the components (servo amplifier, motor, cables
Kollmorgen | kdn.kollmorgen.com | August 2020
AKM2G Instructions | 1 English
7