How Do I Update The Machine Software - Milnor MilTouch Betriebshandbuch

Figure 27: File Transfer Display
.
7. Touch the Data Set Name button in the Machine Memory area on the right side of the screen.
8. Touch the Left Arrow button to export the form
9. When the screen shows that the formula set was exported successfully, touch the Check
button to confirm.
10. Touch the Configur
screen.
11. Touch the Default button.
12. Touch the Left Arrow button.
13. When the screen shows that the configuration was exported successfully, touch the Check
button to confirm.
14. Touch the Home button to return to the Home screen.
15. Remove the flash drive from the US
How do I update the ma
2.1.3.
1. F rom the Home screen
screen (Figure 24).
2. Follow the instructions in the window about attached USB drives, then touch the Check
button.
3. Insert the flash drive that contains the update, then wait for the machine to recognize the
drive.
4. If the status light does not glow green within 5 s
USB Mount button.
5. When the controller prompts that a new MilTouch version is available, touch the check box
to run the update. The controlle
6. When the second updat
copying the new softwa
Screen
ation Data button in the Machine Memory area on the right side of the
B port.
chine software?
(Figure 24), touch the File Transfer button to view the File Transfe
r signals when it begins initializing the update.
e windo w appears, touch the Update MilTouch button to begin
re to the controller.
27
Chapter 2. How to Update the Machine Software
A. Media Format Available
indicator light
B. Data Set Name/Default
button
C. Machine Memory area
D. Left arrow button
E. Right arrow button
F. Configuration Data
button
G. Home button
H. External Memory area
I. Softw
J. USB Mount button
ula set from the machine to the flash drive.
econds of inserting the flash drive, touch the
PELLERIN MILNOR CORPORATION
Legend
are Update button
r
flash