To Add A New Wash Formula - Milnor MilTouch Betriebshandbuch

Chapter 1. How to Use the MilTouch
4. Touch the Save Changes button
in the formula
5 . Touch the Home button to go to the Home display
Supplement 2
U e the No Steam s
steam supply line.
No Steam—No steam is allowed in this bath step.
After, Run s—Steam starts only after the commanded bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer runs when the steam valve is open.
Stops —Steam begins only after the commanded bath level is achieved. After temperature is
first achieved, no more steam is allowed in the step. The timer stops running when the steam
valve is open.
After, Stops —Steam begins only after the commanded bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer stops running when the steam valve is
open.
Early, After, Runs—Steam starts when the lowest safe bath level is achieved. If necessary,
steam is allowed to maintain tem
Early, Stops—Steam starts when the lowest safe bath level is achieved. A
first achieved, no more steam is allowed in the step. The timer stops ru
valve is open.
Early, After, Stops—Steam starts when the lowest safe bath lev
steam is allowed to maintain temperature. The timer stops ru
open.
To Add a New Wash Formula
1.1.1.1.
2.
1. Fro m the Wash Formula Maintena
2. The control names the new wash formula similar to
3. Touch the Rename button to change the wash formula name.
a. In the Formula Name window, touch the formula name.
b. T ouch the [Clear All] button to erase the formula name that the c
c. U se the keypad to enter a formula name.
d. Tou ch the Accept button to write the new formula name to memory. The Wash Formula
Mai ntenance display appears.
4. Touch t he Steps button beside a formula to add steps.
a. Touch the Add button. A new step appears with a step type of End Formula (00:00).
b. Touch the Step Type button to program the step. The Step Decisions display appears.
• For sele
• For fields that require a typed value, touch th
box changes color to orange, delete
letters to enter the new value. Finally, touch the checkmark button to save the new
value and go back one level. To abandon the m
button.
PELLERIN MILNOR CORPORATION
™
Control
(Figure
(Figure 3).
About the Steam Codes
option unless your machine is configured for steam and connected to a
perature. The timer runs when the steam valve is open.
nce display, touch the Add button.
ction lists, touch the value you want to use.
12
4) to sav e the changes. The control displays the steps
(Figure 1).
el is achieved. If necessary,
nning when the steam valve is
[N ] Formula - xx
e value in the box at the top. When the
the current value. Touch the desired numbers or
ost recent change, touch the Exit
fter temperature is
nning when the steam
, where xx is a number.
ontroller provided.