Herunterladen Diese Seite drucken

Baninni Arona Isofix BN2001-1 Handbuch Seite 12

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

NOTICE:
1.This is a "Universal" child restraint when be used without connection with
ISOFIX anchorage. It is approved to Regulation No.44,04 series of amendments,
for general use in vehicles and it will fit most ,but not all, car seats.
2.When installing the LB-526B with easy- fix system(connection with ISOFIX
anchorage), the child seat fall into the "Semi-universal" admission category. It
may only be used in certain types of vehicles.
3.The mass group is: group 2+3 (15 to 36kg).
4.If in doubt, consult either the child restraint manufacturer or the retailer.
Read this instruction manual carefully before use and save it for future
reference in the pocket provided on the backrest of the child safety seat.
Failure to follow the instructions contained in this manual could result in
serious injury to your child .
For the protection of all vehicle occupants
In the case of an emergency stop or an accident, persons or objects which are
not properly secured in the car can cause injury to other vehicle occupants.
For this reason, please always check that...
*the backrests of the vehicle seats are locked (e.g. that the latch on a folding
rear seat bench is engaged).
*all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are
secured.
*all persons in the vehicle have their seatbelts fastened.
*the child safety seat is always secured in the car via a 3-point belt , even when
there is no child in the seat.
1
For the protection of your child
*The more snug the harness fits over your child's body, the safer your child
will be.
*Please do not ever leave your child unattended in the child safety seat in the
vehicle.
*Use on the rear seat:
Move the front seat forward far enough that you child's feet cannot hit the
backrest of the front seat (to prevent risk of injury).
*The child safety seat can get hot in direct sunshine. Caution: Children's skin
is delicate and could be injured as a result. Protect the child seat against
intensive direct sunlight when it is not currently in use.
*Only allow your child to enter and exit the vehicle on the pavement side.
*Make stops during longer journeys to give your child an opportunity to run
about and play.
*Always make sure that any straps holding the seat restraint to the vehicle shall be
.
tight , and check that the straps shall not be twisted.
*It is dangerous to make any alteration or additions to the device without the approval
of the competent authority, and a danger of not following closely the installation
instructions provided by the child restraint manufacturer.
*The child restraint must not be used without the cover .The seat cover should not be
replaced with any other than the one recommended by the manufacturer, because
the cover constitutes an integral part of the restraint performance.
*For easy fix installation: Make sure you read the car manufacturer's handbook.
*This instruction manual can be retained in the special space of the child seat for its
life period
.
*Do not use any load bearing contact points other than those described in the
instructions and marked in the child restraint.
To protect your vehicle
Some vehicle seat coverings made of more delicate materials (e.g. velour,
leather, etc.) may develop wear marks when child seats are used.
For optimum protection of your seat covers, we recommend using LB/BBC Car
Seat Protector, which is available from our of accessories
.
.
2

Werbung

loading