Geemarc LoopHEAR 20 Bedienungsanleitung Seite 8

1. Turn on the headset using the ON/ OFF/ VOLUME
(
2. Set the mode switch(
microphone allows you to hear all the surrounding
sounds.
3. Set the mode switch(
can be used in rooms especially equipped with a
magnetic loop (church/conference room...etc) due to
its "built in T-Coil". LoopHEAR
emitted magnetic waves then amplify them
headsetthe
the "built in T Coil"
Downloaded from www.Manualslib.com
) control and adjust the volume.
) to MIC( ), the built in
) to T( ), LoopHEAR
TM
20 will receive the
LH20. You will receive all the benefits of
in the LH20.
7
manuals search engine
TM
20
to in your