Maintenance - EINHELL ERGO TOOL E-SB 800E Gebrauchsanweisung

Anleitung E-SB 800 E SPK 7
GB
1. Scope of delivery pack-
age
E-SB 800 E,
Additional grip with bit stop
2. Use:
The drilling machine is designed for
drilling holes in wood, iron, nonfer-
rous metals and stone using the
corresponding drill bit.
3. Description
1 Quick-change drill chuck
2 Depth stop
3 Additional handle
4 Selector button: drill/hammer
5 Selector button:
clockwise/anticlockwise
6 Speed control
7 Locking button
8 On/Off switch
4. Safety regulations
The corresponding safety infor-
mation can be found in the enc-
losed booklet.
5. Technical data
Voltage: 230 V ~ 50 Hz
Power rating:
Drilling capacity Concrete 13 mm
Steel 13 mm
6
04.08.2004 8:36 Uhr
No Load Speed
Safety insulated
Sound pressure
level LPA
Sound power
level LWA
Vibration a w
Weight

6. Maintenance

Always keep the drill clean.
Do not use corroding agents for
cleaning plastic.
In case of excessive sparking,
have the carbon brushes re-
placed only by a qualified
electrician.
Keep ventilation channels free.
7. Ordering replacement
parts
Please quote the following data
when ordering replacement parts:
Type of machine
Article number of the machine
Identification number of the
machine
Replacement part number of
the part required
800 W
Seite 6
Wood 32 mm
0 - 2800 min -1
II /
91 dB(A)
104 dB(A)
7,3 m/s 2
2,4 kg