Siemens SITRANS LR200 Kurzanleitung Seite 16

Programming via the handheld programmer
Notes:
• Press Mode
• While the device is in PROGRAM mode the output remains fixed and does not respond to
changes in the device.
• SITRANS LR200 automatically returns to Measurement mode after a period of inactivity in
PROGRAM mode (between 15 seconds and 10 minutes, depending on the menu level).
Parameter menus
Parameters are arranged in a 5-level menu structure.
For the complete list of parameters with instructions, see
the full manual.
1.
• Point the programmer at the display (from a maximum
• RIGHT arrow
• Mode
2.
Note: For Quick Access to parameters via the handheld programmer, press Home
enter the menu number, for example: 2.7. 1 (Volume).
Key
Page EN-14
Downloaded from www.Manualslib.com
to toggle between Measurement and Program Mode.
Enter PROGRAM mode
distance of 300 mm [1 ft.]).
activates PROGRAM mode and
opens menu level 1.
opens the menu level last displayed in
PROGRAM mode within the last 10 minutes, or menu
level 1 if power has been cycled since then.
Navigating: key functions in Navigation mode
Name Menu level Function in Navigation Mode
UP or DOWN menu or
arrow parameter
menu
RIGHT arrow
parameter
menu or
LEFT arrow
parameter
menu or
Mode
parameter
menu or
Home
parameter
SITRANS LR200 (HART) – QUICK START MANUAL
manuals search engine
1. QUICK START
2. SETUP
2.1. DEVICE
.............
2.7. LINEARIZATION
2.7.1. VOLUME
2.7.1.1. VESSEL SHAPE
handheld programmer
Max. 300 mm
(1 ft)
Scroll to previous or next menu or parameter.
Go to first parameter in the selected menu, or open
next menu.
Open Edit mode.
Open parent menu.
Change to MEASUREMENT mode.
Open top level menu: menu 1.
display
, then
A5E31993614