Functional Description; Intended Use; Product Features; Technical Data - Bosch PCM 7 Originalbetriebsanleitung

OBJ_BUCH-880-001.book Page 26 Tuesday, March 24, 2009 4:39 PM
26 | English

Functional Description

Intended Use

The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in wood. In this, mitre angles from
–46° to +46° as well as bevel angles from 0° to
45° are possible.
The capacity of the power tool is designed for
sawing hardwood and softwood.

Product Features

The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Handle
2 Laser warning label
3 Lever for releasing the tool arm
4 Blade guard
5 Retracting blade guard
6 Fence
7 Insert plates
8 Screws for insert plate
9 Handle for turning the saw table
10 Scale for mitre angle (horizontal)
11 Saw table
12 Mounting holes
13 Recessed grips
14 Quick-action clamp
15 Scale for bevel angle (vertical)
16 Roller
17 Saw blade
18 Dust bag
19 On/Off switch
20 Laser switch (for marking of cutting line)
21 Sawdust ejector
22 Allen key (size 6 mm)
1 609 929 S46 | (24.3.09)
Downloaded from www.Manualslib.com
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
manuals search engine
23 Clamping lever for various bevel angles
(vertical)
24 Transport safety-lock
25 Clamping lever for any mitre angle
26 Allen screws (6 mm) of the fence
27 Holes for quick-action clamp
28 Spindle lock
29 Battery compartment
30 Allen screw (size 6 mm) for mounting of saw
blade
31 Clamping flange
32 Interior clamping flange
33 Wing bolt
34 Threaded rod
35 Angle indicator (horizontal)
36 Angle indicator (vertical)
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Chop and Mitre Saw
Article number
Rated power input
Rated voltage
Frequency Hz
No-load speed min
Laser type
Laser class
Weight according to kg
EPTA-Procedure
01/2003
Protection class
Permissible workpiece dimensions (maximal/minimal)
see page 30.
The values given are valid for nominal voltages [U] of
230 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
PCM 7
3 603 M01 2..
W 1100
V 230
50/60
-1
4800
650 nm, < 1 mW
2
8.0
/II
Bosch Power Tools