Functional Description; Intended Use; Product Features - Bosch PSB 850-2 RE Originalbetriebsanleitung

Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling
in wood, metal and plastic. Machines with elec-
tronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.
Bosch Power Tools

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Depth stop
2 Keyless chuck
3 Button for depth stop adjustment
4 "Drilling/Impact Drilling" selector switch
5 Thumbwheel for electronic speed preselec-
tion (PSB 1000-2 RCE/PSB 1000-2 RCA)
6 Indicator for right rotation
7 Indicator for left rotation
8 Lock-on button for On/Off switch
9 Rotational direction switch
10 On/Off switch
11 Gear selector
12 Auxiliary handle
13 Wing bolt for adjustment of auxiliary handle
14 Extraction device with dust collector *
15 Dust collector*
16 Thumbwheel for speed preselection
(PSB 850-2 RE/PSB 850-2 RA)
17 Release button for dust collector *
18 Filter element (micro filtersystem) *
19 Rubber gasket for dust collector *
20 Dust protection ring*
21 Release button for extraction device *
22 Clamp for extraction device *
23 Locking latch for dust collector*
24 Universal bit holder*
25 Screwdriver bit*
26 Allen key **
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
**Commercially available (not included in the deliv-
ery scope)
English | 19
2 609 003 378 | (4.6.09)