ASROCK Z170A-X1/3.1 Handbuch Seite 140

Step 9
Enter the folder created in Step 1, by inputting "cd.." and "cd (folder name)" commands.
Refer to the screenshot below.
"cd.." : go to the upper level
"cd (folder name)" : enter the assigned folder
Step 10
To add USB 3.0 drivers into "boot.wim" in order to install Windows® 7 by flash3.0, please
input the following commands in order and wait until the each process completes.
Step 11
To add the drivers into the "install.wim" image file, please input the following commands
in order and wait until the each process completes.
Downloaded from www.Manualslib.com
dism /mount-wim /wimfile:boot.wim /index:2 /mountdir:mount
dism /image:mount /add-driver:"usb3" /recurse
dism /unmount-wim /mountdir:mount /commit
dism /mount-wim /wimfile:install.wim /index:4 /mountdir:mount
dism /image:mount /add-driver:"usb3" /recurse
dism /unmount-wim /mountdir:mount /commit
manuals search engine
Z170A-X1/3.1
139