ASROCK Z170A-X1/3.1 Handbuch Seite 138

Creating Windows® 7 Installation Disk with USB 3.0 Drivers
Packed
The USB 3.0 ports on your motherboard require the USB 3.0 drivers to function
properly. Due to the Windows® 7 installation disk does not include the USB 3.0
drivers, please create a Windows® 7 installation disk with the Intel® USB 3.0
eXtensible Host Controller (xHCI) drivers packed into the ISO file of your own.
Requirements
•
•
•
•
Instructions
Step 1
Create a new folder under C:\ on your computer. Here we name the folder "asrock" as an
example.
Step 2
Create another two subfolders under the "asrock" folder. Name the subfolder "mount" and
"usb3" as examples.
Step 3
Insert Windows® 7 installation disk in your CD drive.
Step 4
Copy "boot.wim" and "install.wim" files from the "Sources" folder in the Windows® 7
installation disk to the "asrock" folder created in Step 1.
Step 5
Insert the ASRock Support CD in your CD drive.
Step 6
Go to folder "Drivers" and then find the "Intel USB3.0 Driver" folder.
Downloaded from www.Manualslib.com
A program that can create and modify ISO files, such as UltraISO
Windows® 7 installation disk
USB 3.0 drivers (included in the ASRock Support CD)
Windows® PC
manuals search engine
Z170A-X1/3.1
137