Power On/Off; Video Recording - Wiseup GL1200 Benutzerhandbuch

[Note]:
If no Micro SD card is fitted into the camera, the indicator light will flash red and
blue fast. The camera will shut down automatically in 5 seconds.

3.1. POWER ON/OFF

3.1.1 Power on the camera by holding down the Power button for 2 seconds.
The indicator light will flash blue once and glow solid blue, indicating the
camera has entered into standby mode.
3.1.2 Power off the camera by holding down the Power button for 2 seconds.
The indicator light will flash blue 3 times and go out.
[Note]:
The camera will shut down automatically if it is in standby mode without any
operation more than 1 minute.

3.2. VIDEO RECORDING

3.2.1 Power on the camera by holding down the Power button for 2 seconds.
The indicator light will flash blue once and glow solid blue, indicating the
camera has entered into standby mode.
3.2.2 Press the Video Record Button once to record video. The indicator light
will flash blue 3 times and then go out.
3.2.3 Press the Video Record Button again to stop video recording. The
indicator light will flash blue once and glow solid blue, indicating the camera is
back to standby mode.
[Note]:
1). Video files will be saved automatically every 3 minutes.
2). Low battery will shorten video file length.
3). The camera can record videos for 1 hour continuously on a full charge.
4). Video Resolution: 1920x1080P Video Format: AVI
Downloaded from www.Manualslib.com manuals search engine