Wiseup GL1200 Benutzerhandbuch Seite 3

3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1 Power on the camera by holding down the Power button for 2 seconds.
The indicator light will flash blue once and glow solid blue, indicating the
camera has entered into standby mode.
3.3.2 Press the Camera button once. The indicator light will flash blue 4 times
and go off, indicating the camera has entered into auto photograph mode. The
camera will take a photo every 2 or 3 seconds automatically.
3.3.3 Press the Camera button again to exit auto photograph mode. The
indicator light will glow solid blue, indicating the camera is back to standby
mode.
3.4. VIDEO/PHOTO FILE UPLOADS
3.4.1 When the camera is powered off, remove the Micro SD card from the
camera and insert it into a card reader.
3.4.2 Insert the card reader into a proper PC computer USB port.
3.4.3 Removable disk driver appears.
3.4.4 All of your files can be accessed in the DCIM folder.
3.5. SET THE DATE/TIME STAMP
3.5.1 When the camera is powered off, remove the Micro SD card from the
camera and insert it into a card reader.
3.5.2 Insert the card reader into a proper PC computer port.
3.5.3 Removable disk drive folder appears.
3.5.4 Click on the drive in the root directory and inside the root directory, create
a "time.txt" file.
3.5.5 Input the current date and time in the "time.txt" file with the correct
format:
Year.Month.Day Hour:Minute: Second (For example: 2016.03.12 17:04:59).
Downloaded from www.Manualslib.com manuals search engine