Operation; Power On/Off; Video Recording - Wiseup P6000 Benutzerhandbuch

-1× AC110-230V to DC 5V Charging Adapter
-3× Backup Ink Refills
III. Operation
>> Before using, make sure your pen camera is fully charged and there is enough
space in the built in memory.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The red
and blue indicator lights will stay illuminated for 9 seconds, then the red indicator
light will stay illuminated while the blue one will turn off, indicating the camera has
entered into standby mode.
3.1.2. In standby mode, power off the camera by pressing the Power Button for 2
seconds again. The red indicator light will turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any
operation more than 3 minutes. Both blue and red indicator lights will flash once and then
turn off.

3.2 VIDEO RECORDING

3.2.1. Slide the Mode Switch to the position M, power on the camera by pressing
the Power Button for 2 seconds. Both red and blue indicator lights will stay
illuminated for 9 seconds, then the red indicator light will remain solid while the blue
one will turn off, indicating the camera has entered into standby mode.
3.2.2. Press the Power Button once to start video recording. The red indicator light
will start flashing slowly.
3.2.3. Press the Power Button once again to stop video recording. The red indicator
light will stay illuminated, indicating the camera is back to standby mode.
[Note]:
1). A video clip will be generated and saved every 3 minutes automatically.
2).This pen camera can record video for 40minutes continuously on a full charge.
3).Video Resolution: 1920x1080PVideo Format: AVI
4). If the battery is low, the camera will save all video files and shut down automatically.