Troubleshooting; Technical Data - Clatronic UM 3470 Bedienungsanleitung

For thorough cleaning, please remove the mixing vessel.
Mixing Vessel
• Clean the mixing vessel immediately after use in warm
soapy water.
WarnInG: Danger of injury!
The blades on the blade block are sharp.
• After all parts have been cleaned and dried, assemble your
mixer as described under Installation.
Housing
• Only a moderately moist cloth should be used for cleaning
the outside of the device.

Troubleshooting

Device is not working.
Remedy:
Check the mains connection.
Check the position of the rotary switch.
Other possible causes:
The device is fitted with a safety switch.
This prevents the motor from starting up unintentionally.
Remedy:
Check that the mixing vessel and the lid are firmly in place.
noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 82 dB(A) (no limit)
20

Technical Data

Model: ........................................................................... UM 3470
Power supply: ......................................... 220 - 240 V~ 50/60 Hz
Power rating nominal: ...................................................... 450 W
Power rating maximum: ................................................... 500 W
Protection class: ........................................................................ II
Capacity: ...................................................................... max. 1.5 l
Net weight: ......................................................... approx. 1.47 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed
of can be obtained from your local authority.