Cleaning And Maintenance - RUSTA 903014050101 Gebrauchsanweisung

for at least 5 min before making coff ee again. Otherwise a burnt odor may occur in
your Espresso coff ee. If you want to make coff ee immediately, follow the next steps:
First, press and release the steam button "
wand into a cup; secondly, press the pump control button "
and turn on the steam control knob and there will be water fl ow out from steam wand ;
after the ready indicator extinguishes, press and release the pump control button "
to the higher position, then turn the steam control knob to "O" position. When the ready
indicator illuminates, you can start to brew coff ee again.
AUTOMATIC POWER OFF FUNCTION
The appliance will turn off automatically 29 minutes after pressing ON/OFF button.

CLEANING AND MAINTENANCE

1. Cut off power source and let the espresso machine cool down completely before cleaning.
2. Clean housing of espresso machine with a sponge and clean water tank, drip tray and
removable shelf regularly, then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water
for cleaning.
3. Detach the portafi lter by turning it clockwise, get rid of any coff ee residue inside, then
you can clean it with soap, and then rinse with clear water. Do not wash the portafi lter
in a dishwasher.
4. Clean all the attachments in the water and dry thoroughly.
Note: Clean the appliance after every use to maintain it working properly.
CLEANING MINERAL DEPOSITS
1. To ensure your espresso maker can operate effi ciently, internal piping is clean and
the removal of coff ee residue, you should clean away the mineral deposits left every
2–3 months.
2. Fill the tank with water and descaler to the MAX level (the proportion of water
and descaler is 5:1, for details, refer to the instructions of the descaler.
3. Follow the program for preheating, put the portafi lter (no coff ee powder in it) and
a carafe (jug) in place. Brew water per "PREHEATING".
4. Press down the ON/OFF button " " to turn on the unit, the power indicator (red) will
be illuminated, you should press the pump control button "
make sure the steam button "
out and close the pump by pressing the pump control button "
moment, the espresso machine begins to be heated.
5. When the ready indicator (green) illuminates, it shows the heating is fi nish. Pressing
down the pump control button "
(about 60 ml). Then close the pump and wait for 5s.
6. Press down the steam button "
IM_903014050101_Espresso_machine_v2.indd 9
" to the higher position; dip the steam
" is at the higher position, when there is water fl owing
" to the lower position and make two cups coff ee
" to the lower position, waiting until the yellow indicator
" down to the lower position
" to the lower position,
" again, and wait for a
"
9
2019-10-03 13:57