Philips FC9239 Bedienungsanleitung Seite 15

4222.003.3333.3.indd 15
8 Then clean the filter cylinder case with a dry cloth or with cold tap
water and some washing-up liquid.
Do not clean the filter cylinder case with the filter cylinder in it under
the tap.
9 Put the filter cylinder back into the filter cylinder case.
Make sure that the filter cylinder case is dry before you reinsert the
filter cylinder into it.
10 Clean the dust bucket with cold tap water and some washing-up
liquid.
11 Put the filter cylinder case back into the dust bucket.
Make sure that the dust bucket is dry before you reinsert the filter
cylinder case.
If you have not reinserted the filter cylinder case, the suction power
lights start flashing and the appliance cannot be switched on.
12 Close the cover firmly ('click').
Cleaning the filter cylinder
If you persistently fail to press the Filter-Clean button when the light in
the Filter-Clean button flashes, the filter cylinder clogs up with dirt and the
suction power becomes insufficient.
If this happens, unclog the filter cylinder in the following way:
1 Switch off the appliance and remove the mains plug from the wall
socket.
2 Press the release button on top of the dust bucket handle to unlock
the cover (1). Swing the cover open (2).
3 Lift the dust bucket out of the appliance.
English
15
09-07-09 15:09