Examples - Wieland gesis KNX P CO Bedienungsanleitung

7. Examples

7.1 One Detector, Two Lighting Rows
● Two lighting rows are switched or
controlled with one detector.
● Operation: master with individual
switching
● Output light A, B active
● Set operation as required: switched
or constant light control
● The mounting location should be
chosen so that the master receives
as near as possible the same amount of light from both lighting rows.
● Further detectors can be used as slaves to extend the detection area.
7.2 Two Detectors, One Lighting Row
Master:
● Operation: master with parallel switching
● Output light A active
● Set operation as required: switched or constant light control
● The mounting location serves as the reference for the brightness relati-
onship for the room.
32
Downloaded from www.Manualslib.com manuals search engine
Gr.2
Lux
Master
Gr.1