Wieland gesis KNX P CO Bedienungsanleitung Seite 27

Brightness difference (Outlets Lights A, B active)
A detector can switch or control up to two lighting rows. The lighting row
nearest the window (know as Output A) usually requires less light.
● homogenous light relationship
● large brightness differences
Switch-off delay time
For settings between 2 - 15min. the switch-off delay time has a self-learning
feature which varies within this range. Settings <2min. or >15min. remain
constant.
● Transfer zones
● Working areas
Stand-by time
If stand-by time is activated, the light-
ing is not switched off on expiry of the
switch-off delay time but remains in
the stand-by mode (approx. 10% light
output). This reduces the number of
switching operations.
● Individual office
● Transfer zones
● Transfer zones with continuous light
Downloaded from www.Manualslib.com manuals search engine
+20%
+40%
approx. 5min.
approx. 10 min.
(inactive)
approx. 15min.
"on"
27
GB